SPH Imitation Acetate Fabric for women's apparel production

SPH is a polyester jacquard woven from fine yarns to imitate acetate: a silky lustre close to the real thing, a soft and pliable hand, and a fluid drape that falls into folds. The mechanical stretch comes from the weave rather than from elastane.

  • 100% Polyester
  • 130–150 GSM
  • 57/58" (145–150 cm)
  • Free A4 sample
  • Custom colour

Overview

What this fabric is

SPH is a polyester jacquard woven from fine yarns to imitate acetate: a silky lustre close to the real thing, a soft and pliable hand, and a fluid drape that falls into folds. The mechanical stretch comes from the weave rather than from elastane.

We weave it at our own site in Lijiaxiang Town Industrial Park, Changxing County, Huzhou. That means the pattern, pick density and usable width are set on our floor, and the roll you receive in a repeat order is checked against the same standard as the sample you approved.

Positioning

Silky acetate-like lustre with spandex-free mechanical stretch. A production fabric for buyers who need a repeatable quality rather than a one-off novelty.

Best for

Dresses, Evening gowns, Blouses, Skirts, Wide-leg trousers, Suits.

SPH Imitation Acetate Fabric — 100% Polyester, 130–150 GSM, woven jacquard fabric from Changxing, Zhejiang
SPH Imitation Acetate Fabric, photographed at our mill in Changxing, Huzhou.

Why this quality

Six reasons buyers choose it

01

Silky lustre, close to acetate

SPH is finished to a silky sheen that reads as acetate, not as polyester satin. It is the lustre — as much as the weight — that makes a dress look expensive on the rail.

02

Fine yarns, soft and pliable

The cloth is woven from fine-count polyester yarns, so the hand stays soft and pliable rather than papery, and it stays that way through cutting, sewing and pressing.

03

Vintage landscape jacquard

The signature range carries elegant vintage landscape motifs, woven on the loom instead of printed on afterwards. The pattern is part of the cloth, so it keeps its definition in wear.

04

Fluid drape, stretch without elastane

It falls into soft folds for bias skirts, evening gowns and wide-leg trousers. The mechanical stretch comes from the weave itself — no spandex to age or snap back unevenly.

05

Wrinkle resistance, stable colour

Good wrinkle recovery keeps a garment presentable through a full day of wear, and colour fastness stays stable across washing and light, which is what repeat orders depend on.

06

An acetate look at a polyester cost

Buyers who want acetate's appearance but need polyester durability and price positioning use SPH as the compromise.

Technical data

SPH Imitation Acetate Fabric specifications

These are our standard production figures. Final values are confirmed against the approved sample and stated on the order confirmation.

SPH Imitation Acetate Fabric — specification sheet, XICHAORUIPIN TEXTILE, Changxing, Zhejiang
Material100% Polyester
ConstructionWoven jacquard, fine-count yarns
Fabric typeSPH (imitation acetate)
Width57/58" (145–150 cm), customizable
Weight130–150 GSM, ±5% tolerance
ColourCustom colour by Pantone; printing acceptable
PatternVintage landscape jacquard, developed in-house
SurfaceSilky lustre comparable to acetate; soft and pliable hand feel, excellent drape, good wrinkle resistance, stable colour fastness
Main useLight-luxury dresses, evening gowns, blouses, skirts, wide-leg trousers and suits; also bedding sets, tablecloths and sofa upholstery
CustomizationCustom weight, width and colour; OEKO-TEX testing available
SampleFree A4 sample, buyer pays courier; sample lead time 5–7 days
PackingRoll packing or buyer's packing requirement
MOQBased on colour, width, GSM and order details

Weight tolerance ±5%. Figures describe standard production and are not a guarantee for every colour or finish; the approved sample governs.

Applications

Where sph imitation acetate is used

Buyers specify this quality mainly for the following garments and products. Each one is a confirmed application from orders we have produced, not a guess.

  • Dresses
  • Evening gowns
  • Blouses
  • Skirts
  • Wide-leg trousers
  • Suits

Secondary use — high-end home textiles. The same quality is also supplied for bedding sets, tablecloths and sofa upholstery.

See all applications across the range

Matched to the garment, not the catalogue

If you are choosing between two qualities for the same garment, send the design sketch. Hand feel and drape decide more than the specification sheet, and a swatch settles it in a way a data table cannot.

Sample before you commit

Free A4 swatches are available for every quality in the range. The buyer covers courier cost only.

Manufacturing & inspection

How this quality is produced

  1. Yarn and warping

    Yarn is selected against the approved composition, then warped in-house so beam tension is consistent before weaving starts.

  2. Weaving

    The jacquard pattern is set on the loom. Pick density and pattern alignment are monitored through the run, not only on the first metre.

  3. Dyeing and finishing

    Colour is matched to the approved lab dip. Finishing is set to the hand feel agreed for the order.

  4. Inspection and packing

    Each roll is checked for width, GSM, shade and surface defects, then packed to your marking instructions.

Warping workshop at the Xichao Ruipin jacquard fabric mill in Changxing, Zhejiang
Warping area, where beam tension is set before the jacquard looms.

Quality points

What we check before shipment

  • Usable width against the agreed specification
  • GSM inside the ±5% tolerance on the order
  • Shade against the approved standard, roll to roll
  • Pattern alignment and repeat consistency
  • Surface and weaving defects under inspection light
  • Roll length, packing and shipping marks

Problems we help you avoid

The complaints we design against

  • Width shortage discovered at the cutting table
  • GSM drift between production batches
  • Shade difference between the sample and bulk
  • Pattern misalignment between rolls
  • Roll length shortfalls on arrival
  • Shipment delay caused by late finishing

OEM & customization

What can be changed to your specification

Customization options for sph imitation acetate fabric
OptionWhat we can adjustNotes
PatternNew motif development or modification of an existing designSketch, mood board or reference fabric required
ColourLab dip matched to Pantone, or matched to your physical swatchApproved dip kept on file for repeat orders
WeightWithin the woven GSM range of this qualityConfirmed per order before production
WidthCustomized within loom and finishing limitsState the usable width you cut to
FinishHand feel adjusted to the agreed standardConfirmed on the sample
PackingRoll packing, buyer marking, private labelSend packing instructions with the order
TestingThird-party testing on requestQuoted separately with lead time

How our OEM development process works

Comparison

SPH Imitation Acetate compared with real acetate fabric

Buyers often shortlist these two for the same garment. The differences that matter in production are below.

SPH Imitation Acetate Fabric versus Real Acetate Fabric
Point SPH Imitation Acetate Acetate
LustreSilky, close to acetateNatural soft sheen, slightly warmer in tone
Hand feelSoft and pliable, holds its bodySofter, but loses body when wet
StretchMechanical, built into the weaveNone — cut on the bias to gain give
Wrinkle resistanceGood, recovers after wearCreases readily; often pressed after cleaning
CareMachine washable, tumble dry lowUsually dry clean only
Colour fastnessStable through washing and lightCan shift with heat, steam and humidity
CostLower and more stable across seasonsHigher; follows pulp and acetate supply

Markets

Where this fabric ships

Europe

Germany, France, Italy, Spain, United Kingdom, Poland.

Middle East

UAE, Saudi Arabia, Turkey.

Southeast Asia

Vietnam, Thailand, Indonesia, Malaysia.

Africa & Americas

Nigeria, South Africa, Morocco, Brazil, USA.

FAQ

SPH Imitation Acetate Fabric — frequently asked questions

What is sph imitation acetate fabric?

SPH Imitation Acetate Fabric is a woven jacquard fabric in 100% polyester, normally produced in the 130–150 GSM range at 57/58" (145–150 cm) usable width. The pattern is created on the loom during weaving rather than applied to the surface afterwards.

What weight and width can you supply?

Our standard weight is 130–150 GSM with a ±5% tolerance, at 57/58" (145–150 cm). Other weights and widths can be woven to order within the capability of the loom and finishing line — tell us the target and we will confirm feasibility before quoting.

What is your MOQ for sph imitation acetate?

MOQ depends on colour, width, GSM and pattern, so we quote it per style instead of publishing a single figure. For a first trial order we can be flexible; send the quantity you have in mind and we will confirm what is possible.

Can you match a colour from my sample or a Pantone number?

Yes. Send a physical swatch or the Pantone reference. We prepare a lab dip for your approval before bulk dyeing, and we keep the approved standard on file so repeat orders stay consistent.

Can you develop a custom pattern?

Yes. Send a sketch, mood board or reference fabric. Our design team drafts the pattern, we weave a trial, and you approve the sample before bulk production.

How long does sampling take?

Stock qualities are usually dispatched within 5–7 days. A new pattern needs pattern drafting plus a weaving trial, so allow roughly two to three weeks depending on complexity.

Is OEKO-TEX available?

OEKO-TEX testing can be arranged on request for qualifying orders, against the standard you specify. Certification is issued per tested article, so we confirm applicability at enquiry stage rather than claiming blanket certification.

What are the main applications?

The usual applications are dresses, evening gowns, blouses, skirts, wide-leg trousers, suits. If your garment is not on that list, send us the design — we will tell you honestly whether this quality suits it.

Which ports do you ship from and what are the terms?

We ship from Shanghai and Ningbo. FOB, CIF and CNF are all workable; tell us your preferred Incoterm and destination port at enquiry stage and we will quote against it.

Request sph imitation acetate samples

Send your target weight, width, colour and quantity. We will confirm availability and dispatch an A4 swatch, usually within 5–7 days for stock qualities.

Chat on WhatsApp