Shimmer Fog Brocade Fabric for women's apparel production

A blended polyester-nylon brocade with a low, even shimmer rather than a hard metallic gloss. The floral jacquard sits under the surface sheen, which makes it read as quiet luxury on camera and in daylight.

  • 80% Polyester / 20% Nylon
  • 90–130 GSM
  • 57/58" (145–150 cm)
  • Free A4 sample
  • Custom colour

Overview

What this fabric is

A blended polyester-nylon brocade with a low, even shimmer rather than a hard metallic gloss. The floral jacquard sits under the surface sheen, which makes it read as quiet luxury on camera and in daylight.

We weave it at our own site in Lijiaxiang Town Industrial Park, Changxing County, Huzhou. That means the pattern, pick density and usable width are set on our floor, and the roll you receive in a repeat order is checked against the same standard as the sample you approved.

Positioning

Soft silky luster with a subtle oriental floral jacquard. A production fabric for buyers who need a repeatable quality rather than a one-off novelty.

Best for

Dresses, Blouses, Shirts, Fashion garments, Occasion wear.

Shimmer Fog Brocade Fabric in 80% Polyester / 20% Nylon, 90–130 GSM — jacquard fabric from Changxing, Zhejiang
Second colourway of shimmer fog brocade fabric, 90–130 GSM, woven in Changxing, Huzhou
Shimmer Fog Brocade Fabric — gold oriental floral jacquard brocade with a soft shimmer luster, photographed at our mill in Changxing, Huzhou, Zhejiang, China
Colourway from our own product sheet — shimmer fog brocade fabric.

From our product sheet

Fabric detail and specified end uses

Woven in 80% polyester / 20% nylon as listed in our specification table, this classic oriental floral jacquard carries a subtle shimmer luster. The hand feel is soft and smooth rather than stiff, with good drape and comfortable wear. The 90–130 GSM quality is specified for women's dresses, blouses, shirts and fashion garments.

Also made for

  • Women's dresses
  • Blouses
  • Shirts
  • Fashion garments

Buyers also describe this quality as oriental floral jacquard or 90–130 GSM polyester nylon brocade. Photograph and appearance notes come from our mill's Chinese product sheet. Where the two documents differ, composition, weight, width, end uses and commercial terms follow the specification table, which is our single source of truth.

Why this quality

Four reasons buyers choose it

01

A low, even shimmer

The sheen reads as a soft fog rather than a metallic flash, which photographs well and does not look theatrical in daylight.

02

Drape that stays fluid

The nylon content adds bounce without stiffness, so it falls into soft folds instead of standing away from the body.

03

Pattern under the sheen

The oriental floral jacquard sits beneath the surface luster, giving depth that a flat satin cannot offer.

04

Works with solid and tonal ranges

Because the shimmer is subtle, it fits a tonal colour story where a high-gloss fabric would fight the rest of the collection.

Technical data

Shimmer Fog Brocade Fabric specifications

These are our standard production figures. Final values are confirmed against the approved sample and stated on the order confirmation.

Shimmer Fog Brocade Fabric — specification sheet, XICHAORUIPIN TEXTILE, Changxing, Zhejiang
Material80% Polyester, 20% Nylon (customizable)
ConstructionWoven
Fabric typeShimmer fog brocade
Width57/58" (145–150 cm), customizable
Weight90–130 GSM, ±5% tolerance
ColourSolid dyed, yarn-dyed, or custom colour against Pantone
SurfaceSubtle jacquard, soft silky luster, good drape
Main useWomen's dresses, blouses, shirts and fashion garments
CustomizationCustom pattern and colour; OEKO-TEX testing available
SampleFree A4 sample, buyer pays courier; sample lead time 5–7 days
PackingRoll packing or buyer's packing requirement
MOQBased on colour, width, GSM and order details

Weight tolerance ±5%. Figures describe standard production and are not a guarantee for every colour or finish; the approved sample governs.

Applications

Where shimmer fog brocade is used

Buyers specify this quality mainly for the following garments and products. Each one is a confirmed application from orders we have produced, not a guess.

  • Dresses
  • Blouses
  • Shirts
  • Fashion garments
  • Occasion wear

See all applications across the range

Matched to the garment, not the catalogue

If you are choosing between two qualities for the same garment, send the design sketch. Hand feel and drape decide more than the specification sheet, and a swatch settles it in a way a data table cannot.

Sample before you commit

Free A4 swatches are available for every quality in the range. The buyer covers courier cost only.

Manufacturing & inspection

How this quality is produced

  1. Yarn and warping

    Yarn is selected against the approved composition, then warped in-house so beam tension is consistent before weaving starts.

  2. Weaving

    The jacquard pattern is set on the loom. Pick density and pattern alignment are monitored through the run, not only on the first metre.

  3. Dyeing and finishing

    Colour is matched to the approved lab dip. Finishing is set to the hand feel agreed for the order.

  4. Inspection and packing

    Each roll is checked for width, GSM, shade and surface defects, then packed to your marking instructions.

Warping workshop at the Xichao Ruipin jacquard fabric mill in Changxing, Zhejiang
Warping area, where beam tension is set before the jacquard looms.

Quality points

What we check before shipment

  • Usable width against the agreed specification
  • GSM inside the ±5% tolerance on the order
  • Shade against the approved standard, roll to roll
  • Pattern alignment and repeat consistency
  • Surface and weaving defects under inspection light
  • Roll length, packing and shipping marks

Problems we help you avoid

The complaints we design against

  • Width shortage discovered at the cutting table
  • GSM drift between production batches
  • Shade difference between the sample and bulk
  • Pattern misalignment between rolls
  • Roll length shortfalls on arrival
  • Shipment delay caused by late finishing

OEM & customization

What can be changed to your specification

Customization options for shimmer fog brocade fabric
OptionWhat we can adjustNotes
PatternNew motif development or modification of an existing designSketch, mood board or reference fabric required
ColourLab dip matched to Pantone, or matched to your physical swatchApproved dip kept on file for repeat orders
WeightWithin the woven GSM range of this qualityConfirmed per order before production
WidthCustomized within loom and finishing limitsState the usable width you cut to
FinishHand feel adjusted to the agreed standardConfirmed on the sample
PackingRoll packing, buyer marking, private labelSend packing instructions with the order
TestingThird-party testing on requestQuoted separately with lead time

How our OEM development process works

Comparison

Shimmer Fog Brocade compared with 4-way stretch jacquard fabric

Buyers often shortlist these two for the same garment. The differences that matter in production are below.

Shimmer Fog Brocade Fabric versus 4-Way Stretch Jacquard Fabric
Point Shimmer Fog Brocade 4-Way Stretch
LusterSoft fog-like sheenEither matte or high gloss
DrapeFluid with nylon bounceDepends on composition
Best forDresses, blouses, tonal collectionsTailored or matte-look garments
Camera behaviourPhotographs evenlyHigh gloss can flare

See the full specification for 4-Way Stretch Jacquard Fabric.

Markets

Where this fabric ships

Europe

Germany, France, Italy, Spain, United Kingdom, Poland.

Middle East

UAE, Saudi Arabia, Turkey.

Southeast Asia

Vietnam, Thailand, Indonesia, Malaysia.

Africa & Americas

Nigeria, South Africa, Morocco, Brazil, USA.

FAQ

Shimmer Fog Brocade Fabric — frequently asked questions

What is shimmer fog brocade fabric?

Shimmer Fog Brocade Fabric is a woven jacquard fabric in 80% polyester / 20% nylon, normally produced in the 90–130 GSM range at 57/58" (145–150 cm) usable width. The pattern is created on the loom during weaving rather than applied to the surface afterwards.

What weight and width can you supply?

Our standard weight is 90–130 GSM with a ±5% tolerance, at 57/58" (145–150 cm). Other weights and widths can be woven to order within the capability of the loom and finishing line — tell us the target and we will confirm feasibility before quoting.

What is your MOQ for shimmer fog brocade?

MOQ depends on colour, width, GSM and pattern, so we quote it per style instead of publishing a single figure. For a first trial order we can be flexible; send the quantity you have in mind and we will confirm what is possible.

Can you match a colour from my sample or a Pantone number?

Yes. Send a physical swatch or the Pantone reference. We prepare a lab dip for your approval before bulk dyeing, and we keep the approved standard on file so repeat orders stay consistent.

Can you develop a custom pattern?

Yes. Send a sketch, mood board or reference fabric. Our design team drafts the pattern, we weave a trial, and you approve the sample before bulk production.

How long does sampling take?

Stock qualities are usually dispatched within 5–7 days. A new pattern needs pattern drafting plus a weaving trial, so allow roughly two to three weeks depending on complexity.

Is OEKO-TEX available?

OEKO-TEX testing can be arranged on request for qualifying orders, against the standard you specify. Certification is issued per tested article, so we confirm applicability at enquiry stage rather than claiming blanket certification.

What are the main applications?

The usual applications are dresses, blouses, shirts, fashion garments, occasion wear. If your garment is not on that list, send us the design — we will tell you honestly whether this quality suits it.

Which ports do you ship from and what are the terms?

We ship from Shanghai and Ningbo. FOB, CIF and CNF are all workable; tell us your preferred Incoterm and destination port at enquiry stage and we will quote against it.

Request shimmer fog brocade samples

Send your target weight, width, colour and quantity. We will confirm availability and dispatch an A4 swatch, usually within 5–7 days for stock qualities.

Chat on WhatsApp