Three-dimensional petals, not a print
The floral motif is cut from the weave, so each petal has a physical edge that catches light and shadow. Printed imitations do not reproduce it.
A lightweight woven jacquard where the floral motif is cut out of the weave itself, giving a soft three-dimensional petal effect and a semi-sheer, airy hand feel.
Overview
A lightweight woven jacquard where the floral motif is cut out of the weave itself, giving a soft three-dimensional petal effect and a semi-sheer, airy hand feel.
We weave it at our own site in Lijiaxiang Town Industrial Park, Changxing County, Huzhou. That means the pattern, pick density and usable width are set on our floor, and the roll you receive in a repeat order is checked against the same standard as the sample you approved.
Semi-sheer 3D cut floral surface with a soft hand feel. A production fabric for buyers who need a repeatable quality rather than a one-off novelty.
Dresses, Blouses, Skirts, Evening wear, Curtain & cushion.
From our product sheet
A 100% polyester cut flower jacquard made with delicate cut-flower craft. The three-dimensional floral pattern sits on a sheer, translucent texture — soft, lightweight, breathable and easy to cut, with an elegant hazy sense. Our specification table lists it at 60–100 GSM and 145–150 cm width; custom pattern, colour, weight and width are available, MOQ is set by colour, width, GSM and order details, and free A4 samples carry a 5–7 day lead time.
Buyers also describe this quality as 60–100 GSM cut flower jacquard or sheer floral fabric for garment. Photograph and appearance notes come from our mill's Chinese product sheet. Where the two documents differ, composition, weight, width, end uses and commercial terms follow the specification table, which is our single source of truth.
Why this quality
The floral motif is cut from the weave, so each petal has a physical edge that catches light and shadow. Printed imitations do not reproduce it.
At 60–100 GSM the fabric stays airy — the reason it works for summer occasion wear and layered dresses in warm markets.
The open areas read as translucent against skin or a lining, which gives designers a deliberate layering tool rather than an accident.
The base is a stable woven sheer ground, so it does not slip or fray beyond the usual handling of sheer fabrics.
Technical data
These are our standard production figures. Final values are confirmed against the approved sample and stated on the order confirmation.
| Material | 100% Polyester |
|---|---|
| Construction | Woven |
| Fabric type | Cut flower jacquard |
| Width | 57/58" (145–150 cm), customizable |
| Weight | 60–100 GSM, ±5% tolerance |
| Colour | Solid dyed, yarn-dyed, or custom colour against Pantone |
| Surface | Cut floral pattern, soft hand feel, semi-sheer 3D effect |
| Main use | Ladies dresses, blouses, skirts, evening wear, home textile, curtain and cushion |
| Customization | Custom pattern, colour, weight and width; OEKO-TEX testing available |
| Sample | Free A4 sample, buyer pays courier; sample lead time 5–7 days |
| Packing | Roll packing or buyer's packing requirement |
| MOQ | Based on colour, width, GSM and order details |
Weight tolerance ±5%. Figures describe standard production and are not a guarantee for every colour or finish; the approved sample governs.
Applications
Buyers specify this quality mainly for the following garments and products. Each one is a confirmed application from orders we have produced, not a guess.
If you are choosing between two qualities for the same garment, send the design sketch. Hand feel and drape decide more than the specification sheet, and a swatch settles it in a way a data table cannot.
Free A4 swatches are available for every quality in the range. The buyer covers courier cost only.
Manufacturing & inspection
Yarn is selected against the approved composition, then warped in-house so beam tension is consistent before weaving starts.
The jacquard pattern is set on the loom. Pick density and pattern alignment are monitored through the run, not only on the first metre.
Colour is matched to the approved lab dip. Finishing is set to the hand feel agreed for the order.
Each roll is checked for width, GSM, shade and surface defects, then packed to your marking instructions.
Quality points
Problems we help you avoid
OEM & customization
| Option | What we can adjust | Notes |
|---|---|---|
| Pattern | New motif development or modification of an existing design | Sketch, mood board or reference fabric required |
| Colour | Lab dip matched to Pantone, or matched to your physical swatch | Approved dip kept on file for repeat orders |
| Weight | Within the woven GSM range of this quality | Confirmed per order before production |
| Width | Customized within loom and finishing limits | State the usable width you cut to |
| Finish | Hand feel adjusted to the agreed standard | Confirmed on the sample |
| Packing | Roll packing, buyer marking, private label | Send packing instructions with the order |
| Testing | Third-party testing on request | Quoted separately with lead time |
Comparison
Buyers often shortlist these two for the same garment. The differences that matter in production are below.
| Point | Cut Flower Jacquard | Shimmer Fog Brocade |
|---|---|---|
| Surface | Cut-out 3D floral with open areas | Flat woven or printed surface |
| Weight | 60–100 GSM, airy | Usually heavier |
| Best for | Occasion wear, layered dresses, curtains | Structured garments |
| Handling | Needs care with sheers and lining | Standard handling |
See the full specification for Shimmer Fog Brocade Fabric.
Markets
Germany, France, Italy, Spain, United Kingdom, Poland.
UAE, Saudi Arabia, Turkey.
Vietnam, Thailand, Indonesia, Malaysia.
Nigeria, South Africa, Morocco, Brazil, USA.
FAQ
Cut Flower Jacquard Fabric is a woven jacquard fabric in 100% polyester, normally produced in the 60–100 GSM range at 57/58" (145–150 cm) usable width. The pattern is created on the loom during weaving rather than applied to the surface afterwards.
Our standard weight is 60–100 GSM with a ±5% tolerance, at 57/58" (145–150 cm). Other weights and widths can be woven to order within the capability of the loom and finishing line — tell us the target and we will confirm feasibility before quoting.
MOQ depends on colour, width, GSM and pattern, so we quote it per style instead of publishing a single figure. For a first trial order we can be flexible; send the quantity you have in mind and we will confirm what is possible.
Yes. Send a physical swatch or the Pantone reference. We prepare a lab dip for your approval before bulk dyeing, and we keep the approved standard on file so repeat orders stay consistent.
Yes. Send a sketch, mood board or reference fabric. Our design team drafts the pattern, we weave a trial, and you approve the sample before bulk production.
Stock qualities are usually dispatched within 5–7 days. A new pattern needs pattern drafting plus a weaving trial, so allow roughly two to three weeks depending on complexity.
OEKO-TEX testing can be arranged on request for qualifying orders, against the standard you specify. Certification is issued per tested article, so we confirm applicability at enquiry stage rather than claiming blanket certification.
The usual applications are dresses, blouses, skirts, evening wear, curtain & cushion. If your garment is not on that list, send us the design — we will tell you honestly whether this quality suits it.
We ship from Shanghai and Ningbo. FOB, CIF and CNF are all workable; tell us your preferred Incoterm and destination port at enquiry stage and we will quote against it.
Send your target weight, width, colour and quantity. We will confirm availability and dispatch an A4 swatch, usually within 5–7 days for stock qualities.